Radio Module Configuration
Version 1.0 Rev B - 08/00
43
Setting the Station Rank
For a base station, rank is the number of remotes that the base polls (regardless of the
actual number of remotes in the system). The base station rank should equal the number of
remotes so the base does not waste time polling nonexistent remotes.
For a remote unit, rank is a unique number that identifies the remote to the base station.
The base station polls remote units sequentially from rank 1 to the base unit s station rank,
then repeats the process.
To set the station rank
1.
From the Main Menu, select
Radio Module Configuration.
The Radio Module
Configuration window is displayed.
2.
Select
Station Rank (1-1000)
.
3.
Type the rank number of the station.
4.
Press
Enter
.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) -> 1 1 1
Center Frequency 2.4400 GHz 2.4400 GHz 2.4400 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 1 1 1
Config Test Minutes (1-120) 30 30 30
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute
