Notices
vi
Version 1.0 Rev B - 08/00
¥
consult the dealer or an experienced radio/TV technician for help.
¥
selecting and testing different channels, if employing 2.4 GHz equipment.
As the Hopper Plus 120-24 is used on a license-exempt, non-frequency coordinated,
unprotected spectrum allocation, and thus can be subject to random unidentified
interference, applications must not be those of a primary control where a lack of
intercommunication could cause danger to property, process, or person. An alternative
fail-safe should be designed into any system to ensure safe operation or shut down, should
communication be lost for any reason.
Other Notices
¥
Changes or modifications to the equipment not expressly approved by Wi-LAN, Inc.,
could void the user s authority to operate the equipment.
¥
Appropriately shielded remote I/O serial cable with the metal connector shell and
cable shield properly connected to chassis ground shall be used to reduce the radio
frequency interference.
¥
FCC radio frequency exposure limits may be exceeded at distances closer than 23
centimeters from the antenna of this device.
¥
All antenna installation work shall be carried out by a knowledgeable and professional
installer.
¥
Use only a power adapter approved by Wi-LAN.
Contacting Wi-LAN
You can contact Wi-LAN applications engineers to help troubleshoot your Wi-LAN
products and to plan your wireless network applications.
Contacting Customer Support
You can contact Wi-LAN customer support at the locations listed below:
You can also contact the Wi-LAN dealer or representative in your region. Phone or email
Wi-LAN for information about the dealer in your area.
Mailing Address
Wi-LAN, Inc.
Suite 300, 801 Manning Road N.E.
Calgary, Alberta CANADA
T2E 8J5
Tel: +1-403-273-9133
Canada and USACall toll free:
1-800-258-6876
Available from:
8:00 a.m. to 5:00 p.m. (GMT-7:00)
Outside North America
Call:
+1-403-273-9133
Available from:
8:00 a.m. to 5:00 p.m. (GMT-7:00)
All locations
Send an e-mail message to:
[email protected]
