
ii
Version 1.0 Rev B - 08/00
Viewing Unit Identification
20
Setting Unit Identification
21
Hardware/Software Revision ................................................................... 23
Viewing System Revision Information
23
System Software ROM Images ............................................................... 24
Viewing System Software ROM Images
24
Current System Status ............................................................................ 25
Viewing Current System Status
25
IP Network Configuration ........................................................................ 26
Setting the Internet IP Address and Subnet Mask
26
Setting the Default Gateway IP Address
27
Setting the SNMP NMS Trap IP Address
28
IP Filter Configuration .............................................................................. 29
RF Station Configuration ......................................................................... 32
Setting Test Mode Time
32
Setting the Operating Mode
33
Setting the RF Transmit Status
35
Setting the Link Monitor Period
36
Setting Maximum Remote Distance (Base Station Only)
37
Setting Link Monitor Remote Station Rank
(Base Station Only)
38
Setting Throttling (Remote Station Only)
40
Radio Module Configuration .................................................................... 41
Setting the Station Type
42
Setting the Station Rank
43
Setting the Center Frequency
44
Setting Security Passwords
45
Setting the Scrambling Code
46
Setting the Acquisition Code
47
Setting Config Test Minutes
48
Setting Repeater Mode (Base Station Only)
49
Setting System Symmetry Type (Base Station Only)
50
Setting Dynamic Polling Level (Base Station Only)
51
Setting Remote Unit RF Group
52
Rebooting and Saving RF Configurations
53
RF/Ethernet Statistics .............................................................................. 55
Viewing RF/Ethernet Statistics
55
System Security ...................................................................................... 58
Setting Community Names
58
Setting Login Passwords
59
Setting Remote Access
60
Setting the Automatic Timeout
61
System Commands ................................................................................. 62
Setting Default System Image
62
Setting the Reboot System Image
63
Rebooting the Current Image
63
Restoring Configurations
64