Installation
10
Version 1.0 Rev B - 08/00
Configuring a Unit as a Base
Hopper Plus 120-24 units are delivered from the factory configured as remote units. To
make a wireless bridge, you need to configure one unit as a base unit (base station). All
other units in the wireless network can remain configured as remote units (so you do not
need to change the "station type" of remotes). No user software is required to install a unit.
To configure one unit as a base unit
1.
Connect a PC to the MANGAGEMENT port to the Hopper Plus unit that will be the
base unit.
Connecting PC to MANAGEMENT Port
2.
Start the terminal emulation program (for example, HyperTerm¤—see
Appendix B:
Using HyperTerminal
, page 87).
3.
Press
Enter
. Enter the default password (choose
supervisor
). The Main Menu
is
displayed.
A
IR
MODE W
IR
E
P
O
W
E
R
PL
US
Hopper Plus Unit
PC
Serial Cable
to PC COM port
Management Port
