Cleaning the ion block assembly
March 14, 2014, 715004387 Rev. B
131
14. Use the O-ring removal kit to carefully remove the cone gas O-ring from
the ion block.
15. If the cover seal or cone gas O-ring shows signs of deterioration or
damage, dispose of it in accordance with local environmental
regulations.
16. Insert the combined 2.5-mm Allen wrench and cone extraction tool
through the hole in the ion block blanking plug, and then unscrew and
remove the ion block blanking plug and associated seal.
17. If the blanking plug seal shows signs of deterioration or damage, dispose
of it in accordance with local environmental regulations.
Warning:
To avoid spreading contamination, dispose of the
cover seal and cone gas O-ring in accordance with local
environmental regulations.
Warning:
To avoid spreading contamination, dispose of the
blanking plug seal in accordance with local environmental
regulations.
Blanking plug
Combined 2.5-mm Allen wrench and cone extraction tool
Summary of Contents for Xevo TQD
