Water I.D. Primelab 2.0, Manual

Page: 232 / 301

(83)
QAC
25 - 150 mg/l (QAC)
Powder Pack
+ Tablet
Internal Name: 83-QAC-tab
10ml
Acidifying GP (PPHAFG)
QAC HR Photometer (TbsPQAC)
Measurement procedure:
1 Fill 10 ml test water into a clean 24 mm cuvette.
2 Screw the lid back on the cuvette.
3 Insert the cuvette into the PrimeLab. Pay attention to the arrow on the front of the cuvette.
4 Start ZERO measurement.
5 Remove the cuvette again.
6 Unscrew the lid from the cuvette.
7 Add 1 Acidifying GP powder pillow to the sample water in the cuvette.
8 Stir with the stirring rod for about 20 seconds until the reagent is completely dissolved.
9 Add 1 QAC HR Photometer tablet(s) to the test water in the cuvette.
10 Crush the tablet with a clean stirring rod.
11 Stir with the stirring rod for about 20 seconds until the reagent is completely dissolved.
12 Screw the lid back on the cuvette.
13 Gently swirl the cuvette to mix the liquid well.
14 Insert the cuvette into the PrimeLab. Pay attention to the arrow on the front of the cuvette.
15 Tap TEST to perform the measurement.
16 The measured value is immediately displayed.
T177/204 T177/204