![Water I.D. Primelab 2.0 Manual Download Page 158](http://html2.mh-extra.com/html/water-i-d/primelab-2-0/primelab-2-0_manual_3564857158.webp)
(29)
Iron MR
(total)
0.0 - 10.0
mg/l (Fe²⁺/Fe³⁺)
Powder Can
Internal Name: 29-Iron-MR-pow
10ml
20g PL Iron MR N°1
(Plpow20IronMR1)
Measurement procedure:
1
Fill 10 ml unfiltered sample water into a clean 24 mm cuvette.
2
Screw the lid back on the cuvette.
3
Insert the cuvette into the PrimeLab. Pay attention to the arrow on the front of the cuvette.
4
Start ZERO measurement.
5
Remove the cuvette again.
6
Unscrew the lid from the cuvette.
7
Add 1 x 0.05 ml PL Iron MR 1 scoop(s) powder to the sample water in the cuvette.
8
Screw the lid back on the cuvette.
9
Gently swirl the cuvette to mix the liquid well.
10
Insert the cuvette into the PrimeLab. Pay attention to the arrow on the front of the cuvette.
11
Tap TEST to start a 03:00 minute(s) countdown.
12
After the lapse of a 03:00 minute(s) countdown the measured value is displayed.
Notes:
Special accessories required / not included as standard equipment!
If the sample contains undissolved iron, filter thoroughly (several times, if necessary).
Highly alkaline and acidic samples must be adjusted to pH 3 to 5 before commencing the
measurement.
The measurement is not influenced by undissolved powder.
If your sample contains visible rust, extend countdown to 05:00 minutes manually by waiting
02:00 minutes before pressing TEST.
T103/204
T103/204
Summary of Contents for Primelab 2.0
