Water I.D. Primelab 2.0, Manual

Page: 129 / 301

(70)
Erythorbic Acid
0.00 - 3.50 mg/l (EA)
Liquid
Internal Name: 70-Erythorbic-Acid
10ml
PL Oxygen Scavenger 1 (65 ml) (PL65OxyScav1)
PL Oxygen Scavenger 2 (65 ml) (PL65OxyScav2)
Measurement procedure:
1 Fill 10 ml test water into a clean 24 mm cuvette.
2 Screw the lid back on the cuvette.
3 Insert the cuvette into the PrimeLab. Pay attention to the arrow on the front of the cuvette.
4 Start ZERO measurement.
5 Remove the cuvette again.
6 Unscrew the lid from the cuvette.
7 Add 6 drop(s) of PL Oxygen Scavenger 1 into the cuvette.
8 Add 25 drop(s) of PL Oxygen Scavenger 2 into the cuvette.
9 Screw the lid back on the cuvette.
10 Gently swirl the cuvette to mix the liquid well.
11 Tap TEST to perform the measurement.
12 After the lapse of a 10:00 minute(s) countdown the measured value is displayed.
T74/204 T74/204