Water I.D. Primelab 2.0, Manual

Page: 167 / 301

Avoid contact with eyes. Wear protective gloves.
Certain isolates cannot be detected below 106 cfu.
Disposal of product according to local regulations. Products are stable and unlikely to react in a
hazardous manner under normal conditions of use.
Do NOT re-use semi-micro vials (LG-CB).
Leave at least 12 cm space between multiple LG-MH (magnetic holders).
Reagents are supplied in excess. Do NOT re-use any leftover amounts of reagents.
When emptying cuvettes LG-MHCB, always do so to the BACK and never in front (magnet)!
Please follow the test procedure properly to avoid misreadings.
Once lids of LG-MHCB are removed and to discarded, do NOT use them for any of the following
test steps.
If you do more than 1 test at the same time, only one blanc/ZERO vial is needed.
We propose to use LG-MP4 automatic agitator plate to place up to 20 LG-MHCB cuvettes in
case you do multiple tests at one time.
Measurement has to be performed immediately after the last step (countdown), as the color
reaction might continue.
Leaving reagents at room temperature for 30 minutes before starting the test is essential.
When using larger units of reagents, immediately restore in fridge after use.
Depending on the water quality of the test water, the pre-filter have to be changed during the
filter process, if it is too dirty.
T112/204 T112/204