EUROBLOC
SERVICE MANUAL FOR HOIST
194/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Reassembly
1
2
Install the brake disc (4), the friction disc (5), and the brake.
Secure them in place with fixing screws (3).
Install the motor cover (2) and the power supply plug (8).
3
Install the machinery covers. Switch ON the power supply to
the hoist.
7.3.5.4 Maintenance of traveling brake, DC brake for motor MF06
1
Check the brake type on the rating plate that is fixed to the
brake. Measure the thickness of the brake disc (4). Replace
the brake disc if its thickness is less than the min. thickness.
Brake type and size
Min. thickness of brake disc
Tightening torque for brake fixing screws
NM38710NR#, 2 Nm
5.8 mm
2.5 Nm / 1.8 lbf.ft
NM38711NR#, 4 Nm
5.9 mm
2.5 Nm / 1.8 lbf.ft
NM38712NR#, 2 Nm
5.8 mm
2.5 Nm / 1.8 lbf.ft
NM38713NR#, 4 Nm
5.9 mm
2.5 Nm / 1.8 lbf.ft
CAUTION
If there have been jamming problems with a thinner friction disc (1 mm),
replace it with new friction disc (3 mm).
