EUROBLOC
SERVICE MANUAL FOR HOIST
69/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
1. “U” shaped rod
2. Guide frame, lower half
3. Guide frame, upper half
4. Joint plate
5. Sleeves
6. Self-locking nuts
7. Guide element
Disassembly
1
2
Lower hook to the floor and switch OFF the power supply to
the hoist. Remove the machinery covers.
Remove the two self-locking nuts (6). Pull out the sleeves (5)
and “U” shaped rod (1) from the sockets in the frame halves.
