EUROBLOC
SERVICE MANUAL FOR HOIST
117/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
1. Fan cover
2 Fan
3. Bolt
4. Crank
5 Lever arm
6 Fork lever
Assembly
1
2
Switch OFF the power supply to the hoist.
Remove fan cover (1). Remove snap ring and fan (2).
3
4
Install the crank (4) onto shaft gearing and tighten with bolt (3)
to the shaft centre thread.
Screw the lever arm (5) into fork lever (6).
Note: In hoists with frame size VT3 and drum length equal or more than 1250 mm, the brake is installed in the
end of gearbox. Fork lever and crank should be assembled here.
