EUROBLOC
SERVICE MANUAL FOR HOIST
187/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
7.3.3.1 Maintenance of traveling machinery unit
1
2
Check the gearbox visually for leakage. In case the gearbox
shows signs of excessive leakage, find the reason for the
leakage and replace the worn part, or the complete gearbox.
Check for any excessive noise, vibration, and/or heat. Check
that the traveling motor operates properly when loaded.
3
4
Check the breather-plug (1) (if applicable) breaths freely and
clean if needed.
• Clean the cooling-ribs surface when needed.
Note: If the factory-installed grease is topped up with a different lubricant, ensure that the lubricant is
compatible. Refer to the section “Lubricants” for further instructions.
