EUROBLOC
SERVICE MANUAL FOR HOIST
119/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Before normal operation of the hoist
1
2
Remove manual crank (4), washer and screw (3).
Remove the lever arm (5) from the fork lever (6).
3
4
Install fan and retainer ring (2). Install fan cover (1).
Switch ON the power supply to the hoist.
Assembly
For assembly instructions of the hoisting motor, refer to the section “Hoisting machinery, assembly” and follow
the instructions for removing and reassembling the brake.
CAUTION
In those models where the motor is located inside the drum, it is not possible
to remove the brake wires without extracting the complete motor-gearbox
subassembly from the drum. In this case, it is advised to cut the brake wires
near the brake, and reconnect the wires to the new brake with a proper screw-
or shrink-connector. Do not use a plug-connection.
