EUROBLOC
SERVICE MANUAL FOR HOIST
198/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
1. Side plate (Low headroom)
2. Travel wheel
3. Bearing set
4. Shaft set
5A. Fixing set (Low headroom, load<=5000)
5B. Fixing set (Low headroom, load >=5000 and Normal headroom)
6. Cover plate (Driven wheels)
7. Cap
Disassembly
1
2
Lower the hook to the ground and switch OFF the power
supply to the hoist. Remove the hoist with trolley from the
runway (see section “8. Installation”) and place on a suitable
platform to disassemble the trolley wheels.
For driving wheels:
Remove screws to remove cover plate (6) and cap (7).
