SECTION 8 – RECHARGE, INSPECTION, AND MAINTENANCE
2014-MAY-02 REV. 0 PAGE 8-7
TABLE 8-1: EVENT HISTORY MESSAGES
CHECKFIRE 210
Detection and Actuation System
1.
“System Reset”
2.
“System All Clear”
3.
“Self-Diagnostics Routine Failed”
4.
“Audible Notification Silenced”
5.
“Audible Notification Silence Expired”
6.
“External Power Operation”
7.
“External Power Fault”
8.
“Internal Battery Operation”
9.
“Internal Battery Fault”
10.
“Battery Accumulator Reset”
11.
“System Powered Down”
12.
“Release Circuit Ground Fault”
13.
“Release Circuit Open Circuit Fault”
14.
“Release Circuit Fault”
15.
“Release Circuit Fault Cleared”
16.
“Detection Input #1 Ground Fault”
17.
“Detection Input #1 Open Circuit Fault”
18.
“Detection Input #1 Fault Cleared”
19.
“Detection Input #2 Ground Fault”
20.
“Detection Input #2 Open Circuit Fault”
21.
“Detection Input #2 Fault Cleared”
22.
“Time Delay #1 Started”
23.
“Time Delay #1 Restarted”
24.
“Time Delay #2 Started”
25.
“Release Circuit Activated”
26.
“Detection Input #1 Electric Manual Activation”
27.
“Detection Input #2 Electric Manual Activation”
28.
“Detection Input #1 Initiated”
29.
“Detection Input #1 Initiation Cleared”
30.
“Detection Input #2 Initiated”
31.
“Detection Input #2 Initiation Cleared”
32.
“\”PUSH TO ACTIVATE\” Button Pressed”
33.
“Discharge Confirmed by Pressure Switch”
34.
“Alarm Relay Activated”
35.
“Fault Relay Activated”
36.
“Shutdown Relay Activated”
37.
“Alarm Relay Deactivated”
38.
“Fault Relay Deactivated”
39.
“Shutdown Relay Deactivated”
40.
“Isolate Switch Activated”
41.
“Isolate Switch Deactivated”
42.
“Configuration Has Been Modified”
43.
“History Erased”
44.
“Display Fault”
45.
“Display Fault Cleared”
46.
“Internal Hardware Fault, Replace ICM”
47.
“Firmware Upgrade”
