SECTION 5 – INSTALLATION ANd prOgrAmmINg
2014-MAY-02 REV. 0 PAGE 5-31
TABLE 5-4: dOWNLOAd EVENT HISTOrY LOg (Continued)
CHECKFIRE 210
Detection and Actuation System
Accessing and downloading the Event History Log
The Programming Button (PB) and programming LEDs are
located under the ICM battery compartment cover. The
programming button controls the download process and the
programming LEDs indicate the start and end of the down-
load.
Note: The Event History Log download should be performed
at or near normal temperature conditions. Corrupted or
incomplete history file data can occur if downloads are
attempted at extreme high or low temperatures.
1. Loosen the (4) captive screws and remove cover to gain
access to programming button and view LEDs.
2. Connect the USB communication cable and memory
device to the mini USB port near the programming LEDs.
3. Push programming button 3 x 1 second to begin the file
download. (ICM senses connection with a USB memory
device and starts the download.)
4. Programming LEDs pulse briefly to indicate system has
initiated the download. Then all LEDs pulse in marquee
fashion to indicate the ICM is writing the contents of the
Event History Log to the USB memory device.
5. when complete, all LEDs illuminate steady-on for
5 seconds. A text file is saved on the USB memory
device with the current date. The text file name will be
LOGxxxx where the x place holders will be a number
(e.g. 0001, 0002) determined by the last number of any
previously saved text files on the USB memory device.
Note: The writing of the Event History Log can take
several seconds to complete and should not be inter-
rupted. If the writing is not successful after 30 seconds,
the ICM will quickly pulse all LEDs together multiple times
indicating an unsuccessful file download.
6. Disconnect cable and USB memory device. Re-install
battery cover.
REMOVE
COVER
009273
PROGRAMMING
LEDS
qUICKLY PRESS
PB 3 x 1 SEC.
009279
CONNECT CABLE TO
MINI USB PORT AND
MEMORY DEVICE
dOWNLOAdINg
HISTOrY FILE
LEDs PULSE
IN A MARqUEE
FASHION DURING
FILE DOwNLOAD
NOT SAVEd
LEDs PULSE
TOGETHER
MULTIPLE TIMES
SUCCESSFUL
SAVE
ALL LEDs
STEADY-ON FOR
5 SECONDS
