Tsino Dynatron CoolDrive Series, User Manual

Page: 86 / 285

Settings
74
Index
Sub-ind
ex
Name Unit Setting range
Default
value
effective Period
0x00- Automatic mode;
0x01- Manual mode;
Byte2: Single-turn bit of the second interface encoder
0x00-single-turn bit is 10;
0x01-single-turn bit is 11;
0x02-single-turn bit is 12;
0x03-single-turn bit is 13;
0x04-single-turn bit is 14;
0x05-single-turn bit is 15;
0x06-single-turn bit is 16;
0x07-single-turn bit is 17;
0x08-single-turn bit is 18;
0x09-single-turn bit is 19;
0x0A-single-turn bit is 20;
0x0B-single-turn bit is 21;
0x0C-single-turn bit is 22;
0x0D-single-turn bit is 23;
0x0E-single-turn bit is 24;
0x0F-single-turn bit is 25;
0x10-single-turn bit is 26;
0x11-single-turn bit is 27;
0x12-single-turn bit is 28;
0x13-single-turn bit is 29;
0x14-single-turn bit is 30;
0x15-single-turn bit is 31.
Byte3: Single-turn bit mode selection of the second interface encoder
0x00- Automatic mode;
0x01- Manual mode;
Description:
In automatic setting mode, interface encoder single-turn resolution = actual encoder single-turn resolution.
When the interface encoder's multi-turn bits (0x2017) does not meet the requirements, manual mode can be used. At this
time, the single-turn resolution of the interface encoder is determined by this parameter.
Only applicable to absolute encoder, incremental encoder is invalid.
The single-turn bit (0x2016) of the interface encoder is determined by the feedback purpose of the encoder in the general
setting parameters of the encoder (0x2014 and 0x2015).