Tsino Dynatron CoolDrive Series, User Manual, Page: 5 / 285

Safety Instructions
4

Precautions when keeping the product
Note

Do not overload this product (follow the instructions).

Otherwise it may cause injury or malfunction.

Keep and install the product in places:
• Without direct sunlight
• Where the ambient temperature does not exceed the limits allowed for running this product
• Where the relative humidity does not exceed the limits allowed for running this product
• Where condensation does not occur due to rapid temperature changes
• Where there is no corrosive gas or flammable gas
• Without combustibles
• With less dust, salt and metal powder
• Free of splashing of water, oil and liquid medicine
• Where vibration or impact does not affect the product (the level of vibration or impact does not exceed the
limits allowed for running this product)
• That are not exposed to radiation
Keeping or installing the product in an environment other than the above may cause product failure or
damages.

Precautions when handling the product
Note

Use the correct method to handling the product according to its weight.

When operating the servo drive, pay attention to sharp parts such as the corners of the product.
Otherwise it may result in injury.

Do not overload this product (follow the instructions).
Otherwise it may cause injury or malfunction.

When transporting the servo drive, do not hold the front cover and the connector.
Otherwise it may cause the servo drive to fall.

Servo drives are precise equipment. Do not drop it or apply any strong impact on it.
This may cause its malfunction or damage.

Do not apply impact to the connector.
Otherwise it may result in poor connections or malfunctions.