Toshiba E-studio18 Page 157 User Manual Download

Page: 157 / 172

6.TROUBLESHOOTING

Before Calling Service Technician 155

6 TROUBLESHOOTING

The copy image is partially
missing.

The size or direction of the copy
paper and the original, or the
reproduction ratio is not set
properly.

Use copy paper of the same size as the original or set the
reproduction ratio suitable to the copy paper size.

The margin for binding is too
wide.

Adjust the image shift value again.

P.79 “Shifting the pages to the right or left”

The copy image has black
streaks in a horizontal direction.

The charger is dirty.

Clean the charger.

P.158 “Cleaning charger”

The copy image has white
streaks in a horizontal direction.

The transfer charger wire is dirty.

Clean the transfer charger wire.

P.159 “Cleaning transfer charger”

Phenomenon

Usual cause

Countermeasure

Summary of Contents for E-studio18












































































































































































Search results

Summary of Contents for E-studio18

Reviews:

Related manuals for E-studio18

Brands by name

Popular brands

Toshiba E-studio18, User Manual

Search results

Summary of Contents for E-studio18

Reviews:

Related manuals for E-studio18

Brands by name

Popular brands