Toshiba E-studio18, User Manual

Page: 69 / 172

2.COPY FUNCTIONS
Advanced Copy Functions 67
2 COPY FUNCTIONS
1
Press the [MENU] button to enter the “MENU” mode.
2
Make sure that the first “ADVANCED FUNCTION” is selected.
You can scroll through the menu with the or button.
3
Press the [SETTING/OK] button to enter the “ADVANCED FUNCTION” menu.
4
Press the or button to scroll through the menu until you reach the function you
want to change.
5 Press the [SETTING/OK] button to enter the setting layer of each function.
6 Press the or button or the or button to select the setting.
If you select the setting and press the [START] button, you can immediately start copying with the default or
current setting; however, the [START] button is invalid only for “2IN1/4IN1”. Before you start copying, be sure to
place the original in advance.
7 Press the [SETTING/OK] button.
y
If the selected setting has no more options or values to set, the [SETTING/OK] button allows you to exit from
the menu. You are finished with the operation at this step.
y
If the selected setting has more options or values to set, the [SETTING/OK] button allows you set them.
Continue to the next step.
8
Set the options or values as required with the , , , or button.
The options or values vary from function to function. For the details, see the page that describes each function.
9
Press the [SETTING/OK] button to exit from the menu.
You are ready to start copying with the selected function.
When necessary, set other advanced functions to make use of them in combination.
P.81 “Storing the copy functions for frequent use”
P.165 “Copying Function Combination Matrix”
MENU
1
3 PAPER SETTINGS
DEFAULT SETTINGS
ADVANCED FUNCTION
ADVANCED FUNCTION
1
4 ORIGINAL MODE
FINISHING
DENSITY