Toshiba E-studio18, User Manual

Page: 142 / 172

6 TROUBLESHOOTING
140 When This Message Appears
When This Message Appears
A message appears when a problem occurs on the equipment. Check the items on the list below and take a
countermeasure accordingly.
Message Meaning Countermeasure
PAPER JAM This appears when a sheet of copy
paper is jammed. Remove any jammed paper.
P.141 “Paper Jams”
CLOSE *** This appears when any cover of the
equipment indicated by “***” is not
securely closed. Close the cover securely.
DRAWER EMPTY This appears when the paper in the
drawer has run out. Load paper in the drawer.
P.31 “Loading paper in the drawer”
CALL FOR SERVICE This appears when the repair or
adjustment by your service technician
is needed. Contact your service representative.
Give the service technician the error code (consisting of
letters and numbers) that appears in the upper right area of
the LCD screen.
Never attempt to repair, disassemble or modify the
equipment by yourself.
This could cause an electric shock, a fire or serious injury.
Contact your service representative when the equipment is in
an abnormal condition or any malfunction is found.
TIME FOR MAINTENANCE This appears when the maintenance
by your service technician is needed. Contact your service representative.
BYPASS EMPTY Paper set on the bypass tray has run
out. Load paper on the bypass tray.
P.33 “Loading paper on the bypass tray”
TONER NEAR EMPTY There is only a little toner remaining in
the toner cartridge. There is still a little toner remaining in the toner cartridge. Do
not replace the toner cartridge until “TONER EMPTY” appears
on the LCD screen.
y
The message may not appear because the toner
remaining in the cartridge does not lie evenly.
y
When the message appears, it is advisable to
purchase a new TOSHIBA-recommended cartridge to
prepare for its replacement.
TONER NOT RECOGNIZED The toner cartridge is not installed
correctly. Install the toner cartridge correctly.
A toner cartridge not recommended
by TOSHIBA is being used. If you are using a toner cartridge other than the one we
recommend, the equipment may not be able to detect whether
it is installed or not.
P.13 “Recommended toner cartridges”
TONER EMPTY The toner in the toner cartridge has
run out. Replace the toner cartridge with a new one.
P.146 “Replacing Toner Cartridge”
MEMORY IS FULL
PRESS ANY KEY The built-in memory of the equipment
has become full. Press any button on the control panel. The scanned pages are
cancelled.
CLEAR PAPER OUTPUT
TRAY
PRESS START KEY Approx. 250 sheets of paper have
continuously exited and the
equipment stops copying or printing
to prevent the paper from overflowing
from the tray. Remove the paper from the receiving tray, and then press the
[START] button. Copying or printing resumes.
Press the [CLEAR/STOP] button to end the copy or print job.
“CANCEL JOB?” appears on the LCD screen. Select “YES”,
and then press the [SETTING/OK] button.
CAN NOT USE THIS SIZE The paper size which cannot be used
for the function is selected. Select [CLOSE] and press the [SETTING/OK] button. If you
want to print with a different paper size, press the [MENU]
button and select the appropriate paper size for the function. If
you want to cancel the print job, press the [CLEAR/STOP]
button.