Toshiba E-studio18, User Manual

Page: 36 / 172

1 PREPARATION
34 Preparation 2 - Loading Paper
2
Load paper face down and straight on the bypass tray and then align the side guides to
the paper edges.
y
Up to 100 sheets of plain paper (64 - 80 g/m
2
, 17 - 20 lb. Bond) can be set. In this case, make sure that the
height of the paper stack does not exceed the indicators of the side guides. If paper other than plain is used,
set it one sheet at a time.
y
Fan the stack of paper well before loading it on the bypass tray.
y
Do not push the paper forcibly into the entrance of the bypass feeder. This could cause a paper misfeed.
When you use paper longer than the bypass tray size, pull out the paper holder from the tray.
Register the paper size and type into the equipment.
When you load paper on the bypass tray, register the size and type of the paper into the equipment. Be sure register them
correctly, or they could cause a paper jam.
For the registration, see the following page:
P.39 “Registering the size and type of paper loaded on the bypass tray”
Be sure to register the paper size and type when you have changed the paper size and type on the bypass tray, as well
as when you load paper on the bypass tray for the first time.