Toshiba E-studio18 User Manual Download

Page: 148 / 172

6 TROUBLESHOOTING

146 Replacing Toner Cartridge

Replacing Toner Cartridge

When the toner cartridge runs out of toner, the following message appears on the LCD screen and the Alert lamp blinks on
the control panel.

Then, replace the cartridge with a new one.

When the toner cartridge runs out of toner, the procedure to replace the toner cartridge appears on the LCD screen.

Press the and buttons to scroll up and down the procedure.

Never attempt to incinerate toner cartridges. This could cause an explosion.

Before inserting a new toner cartridge, check its product name. If you can see “T-1800”, it is usable.

Do not dispose of used toner cartridges. Contact your service representative.

Do not touch the parts on the circuit board mounted on the toner cartridge because they may be damaged.

TONER EMPTY

Summary of Contents for E-studio18












































































































































































Search results

Summary of Contents for E-studio18

Reviews:

Related manuals for E-studio18

Brands by name

Popular brands

Toshiba E-studio18, User Manual

Search results

Summary of Contents for E-studio18

Reviews:

Related manuals for E-studio18

Brands by name

Popular brands