Toshiba E-studio18 User Manual Download

Page: 34 / 172

1 PREPARATION

32 Preparation 2 - Loading Paper

Load paper in the drawer.

The maximum number of sheets that can be placed at one time is 250 (64 to 80 g/m

, 17 - 20 lb. Bond). Be

sure that the stack height of paper is not higher than the line indicated at the inner side of the side guide and
trailing guide.

P.29 “Acceptable media types”

Fan the paper well before loading it in the drawer, otherwise multiple feeding could occur. Be careful that the
paper does not cut your fingers.

Load the paper face up. You may tell its “face” by the note on its wrapping paper.

Move the end guide to the trailing edge of the paper while pushing its lower part in the
direction of the arrows.

Widen the gap with both hands.

While holding the green lever of the front side guide, adjust the side guides to the
paper size.

Adjust the side guides with both hands.

Summary of Contents for E-studio18












































































































































































Search results

Summary of Contents for E-studio18

Reviews:

Related manuals for E-studio18

Brands by name

Popular brands

Toshiba E-studio18, User Manual

Search results

Summary of Contents for E-studio18

Reviews:

Related manuals for E-studio18

Brands by name

Popular brands