Toshiba E-studio18, User Manual

Page: 70 / 172

2 COPY FUNCTIONS
68 Advanced Copy Functions
You can check the function settings on the LCD screen.
P.62 “Checking the function settings”
„
Adjusting the density to the copy
You can set “DENSITY” to make copies lighter or darker in nine steps from -4 to +4. The auto density setting represents
the copy image in the middle density status. Follow the steps below to change the density.
y
You can access this function quickly with the button. The button operation varies from region to region.
- For the regions other than Europe, if you have not changed the default:
Keep pressing the button for a second.
P.65 “Using the “F1” or “F2” function quickly”
- For Europe:
Just press the button.
P.63 “Using the “ID CARD” or “DENSITY” function quickly”
y
You can also set the density on the basic setting menu.
P.57 “Changing the density to copy”
1
Press the [MENU] button to enter the “MENU” mode.
2
Make sure that the first “ADVANCED FUNCTION” is selected.
You can scroll through the menu with the or button.
3
Press the [SETTING/OK] button to enter the “ADVANCED FUNCTION” menu.
4
Make sure that “DENSITY” is selected.
If necessary, press the or button to select it.
5
Press the [SETTING/OK] button.
6
Press the or button to select “AUTO” or the density scale.
If you have selected “AUTO” at this step, skip the next step.
If you select the setting and press the [START] button, you can immediately start copying with the default or
current setting. Before you start copying, be sure to place the original in advance.
7 If you have selected the density scale at the previous step, press the or button to
increase or decrease the density level.
8 Press the [SETTING/OK] button to exit from the menu.
You are ready to start copying with the selected function.
MENU
1
3 PAPER SETTINGS
DEFAULT SETTINGS
ADVANCED FUNCTION
ADVANCED FUNCTION
1
4 ORIGINAL MODE
FINISHING
DENSITY