Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 48 / 166

Step 2; Inner sheath treatment
1. Make slit at the point where folding back outer
shield.
NOTE: Do not damage shield part by over
slitting.
Please remain sheath thickness as
around 0.1mm at least.
2. Twisting inner sheath a bit to let it loose.
3. Make slit to outside direction as below.
4. Remove inner sheath.
5. Fold back inner shield as below.
6. Wrap both shields inner and outer together
by insulating tape with 15mm left.
Note; Start from position 1 (left side) to
position 2 (right side).
Then back to position 1 again as go and
return.
1
2
15mm
I- 37