Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 55 / 166

I- 44
Metric English Conversion reference
mm in
1[mm] = 0.0393701[in]
1[in] = 25.4[mm]
M ft
1[m] = 3.28084[ft]
1[ft] = 0.3048[m]
m/s ft/s
1[m/s] = 3.28084[ft/s]
1[ft/s] = 0.3048[m/s]
English Conversion reference
ft
3
1[m
3
] = 35.3147[ft
3
]
1[ft
3
] = 0.0283168[m
3
]
gal
(U.S. fluid gallon)
1[m
3
] = 264.172[gal]
1[gal] = 3.785411784[L]
bbl
(Standard barrel for liquids)
1[m
3
] = 8.38641[bbl]
1[bbl] = 119.240471196[L]
acf
1[m
3
]
=
8.107132e-4[acf]
1[acf] = 1233.48184[m
3
]
(9) Pipe, Sensor and Fluid type
Input and Select all data.
For "Pipe", "Lining" and "Fluid", their sound
velocity values are automatically defined
when you select the listed material or fluid.
They are nominal values.
If you'd like to select other material or fluid not
listed, select "User-defined" and enter new
sound velocity value depending on your fluid
temperature at each column.
Measuring coefficient parameter will be
calculated by using these site data on the
next step as "Localization" function.
When "User-defined" is selected, Localization
can not be applied.
After select and entering values, press "Next".
(10) Localization setting
Selection window for Localization function.
Usually, Localization should be applied and
"4" is selected for Trigger Number.
Press "OK" and calculation for Localization
starts at once.
When "Cancel" or "Abort", go back to (9).
When "User-defined" was selected at (9),
the following window will be appeared.
Then confirm and press "OK".
(11) Confirm mount distance
Calculated distance between transducers will be
shown as below.
These values should be memorized for proper
sensor installation (see Chapter 1-2-9),
"Transducer Installation Procedure”.