Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 30 / 166

I-19
ee. Insert each wire in the loading slot while pushing the lever of the terminal by the screwdriver,
type slotted. Then finished.
AC type DC type
Live-line -----> #1 slot of TB1 Positive-line ----> #1 slot of TB1
Neutral-line -----> #2 slot of TB1 Negative-line ---> #2 slot of TB1
I-2-5 Multi-Path Connection to Main Unit
(1) 2-Path Connection
(If ordered as 2-path system, skip to 1-D.)
1-A. Pulser module
One (1) module is preset in slot "CH1".
For 2-path measurement, one (1) extra pulser module
is required.
This module is set on the mother board in the second
slot "CH2".
1-B. Module insertion
In order to insert the extra module, the module cover
must first be removed by loosening the screws.
Insert module, paying attention to the orientation of the
board.
CAUTION
Pulser Module may be defected by static electricity of your hand. Discharge it prior to touch the module.
1-C. Replace module cover
Replace module cover after insertion of the extra
pulser module.
1-D. CH-2 transducer connection
A second transducer line can be connected to
terminal for CH2 after cable preparation.
Photo for 1-A
C
H
1
C
H
2
Photo for 1-C
Module
Cover