Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 65 / 166

II-6
[Multipliers]
Select multipliers from the following.
10
-6
, 10
-3
, 1, 10
3
, 10
6
, 10
9
For example, 10
3
is expressed as ×1000.
Exponents are not displayed when ‘1’ is selected.
Note1: Setting cannot be done during the flow velocity measurement mode.
Note 2: LCD display exponential indicators may be described in this manual as ‘E-6’ or ‘E+3’, for
example, instead of ‘10
-6 ‘
or ‘10
3 ‘
for reasons of visual clarity.
[Units of flow]
Units of flow measurement can be selected from the following.
m
3
/D, m
3
/h, m
3
/min, m
3
/s, L/h, L/min, L/s, t/D, t/h, t/min, t/s, kg/h, kg/min, kg/s
ft
3
/D, ft
3
/h, ft
3
/min, ft
3
/s, bbl/D, bbl/h, bbl/min, bbl/s, gal/D, gal/h, gal/min, gal/s
acf/D, acf/h, acf/min, acf/s
For example, ‘D’ would be expressed as ‘24H’ and ‘m
3
/s’ would be expressed as ‘m
3
/sec’.
Note: Setting cannot be done during the flow velocity measurement mode. (m/s fixed)
[Flow density]
Setting is required when using mass flow units.
Setting range: 0.100 to 9.000
Fixed unit is g/cm
3
.