Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 131 / 166

III-22
(3) Data receiving with Hyper-Terminal of Windows
Standard windows bundled software Hyper-Terminal handles digital data from main unit.
Please refer to the following procedures.
(Note: The following instruction example is based on a Windows XP version display.)
3.1. Activate Hyper-terminal
3.2. Enter "Connection Name"
Instruction
You can use any name as the connection setting
name. Enter the name, then click OK. (In this
example, the name entered is "sample".)
Instruction
Select & set communication port.
Instruction
Set port settings as below.
Bit
／
sec 9600
Note1
Data bid 8
Parity even
Stop bit 1
Flow control none
Note 1
“Bit/sec” must match the main unit settings.