Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 117 / 166

III-8
Data setting Setting method PC connected to Digital Output port 2, setting through PC with
configuration software (LCD 4-keys entry is available, but limited).
Setting items Indication, Unit (Flow rate and Totalizing) Flow Range and various
settings
Measurement
display
Display method LCD (16 character x 2 lines), with backlight
Over 5 years life (by 25°C)
Display content Changeable display of following:
• Instantaneous flow rate, warnings, check mode and totalizing status.
• Instantaneous flow velocity value, warnings check mode and totalizing
status.
• Forward flow totalized value, warnings, check mode and totalizing status.
• Backward flow totalized value, warnings, check mode and totalized status.
•
Status1 (AGC, Range, Warnings and Check mode)
• Status2
(Number of R-OFF warning & Disturbance Elimination function worked.)
Note:
1) During power failure, displayed screen component is memorized and
displayed when power is again introduced.
2) Instantaneous flow velocity of each path can be indicated on display in
case of multi-path installation.
3) Counter can be reset by key pad operation.
Display digits Instantane
ous flow
rate:
Dependent on max. flow rate for Analog output setting. Max.
7 digits including sign, decimal point.
Forward
Max. 7 digits Including Decimal point
Range: 0 to 99999.0
Backward Max. 7 digits including Sign and Decimal point
Range: -0 to -99999
Instantane
ous flow
velocity:
sign section
integer section
decimal fraction 1 digit
2 digits
3 digits fixed
Totalized
flow:
7 digits
During exceeding Max. range of flow rate for Analog output setting, indication
would be “Instantaneous flow rate” and alternated flickering with “FS" (Full
Scale) mark.