Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 54 / 166

I- 43
"In the beginning"
Meaning of column color
Please be noted that each color of columns on software
are as follows,
Meaning of button
“Read” refers to reading out of parameters from the
flowmeter main unit.
“Write” refers to completion of rewriting of parameters to
the flowmeter main unit. Note that only rewriting of value
of each column is not effective against the main unit.
" Next " refers to proceeding to next menu..
" Back " refers to returning to previous menu.
" Cancel " refers to cancel of setting.
" Close " refers to closing menu.
" Start " refers to start of Auto Gain Adjustment.
" Clear " refers to set zero to History Value.
" OK " refers to agreement.
(5) Communication speed setting
Select Com Port No. and communication
speed.
Default speed is 19200 bps.
Press "OPEN".
Note: Please set communication speed on PC
side as same as setting baud rate on
this tab.
(6) Serial number check
“UF Information” opens automatically.
Click "READ" button.
If communication between the PC and
flowmeter main unit is successful, the
firmware version and serial number of the
main electronics unit will appear.
(7) Setup Wizard for basic configuration
When click “BASIC-Setup Wizard”, Wizard
menu will open.
(8) System Setting
Select "System units" and "Number of path";
"Metric " or "English"
"1 Path" through to "4 Path"
then, Press “Next”.
Column
Color
Status
Blue Before read-out from main unit.
White After read-out from main unit.
Green When value in the column changed.
Yellow When writing is Error.
Entered value may be the out of range.
Click Here