Tokyo Keiki UFL-30, Installation & Operation Manual

Page: 135 / 166

III-26
25 Error Status
If an error occurs, an error number-code will be indicated.
No error is indicated by a blank field.
Refer to II-2-7 table 4-1; Error Code List for each error code.
ERR01
ERR63
" " (blank)
26 Status of Low-Battery
LB
will be indicated in case of low battery. Totalizing value can
not be maintained under low battery status. Battery
replacement required.
LB
" " (blank)
27 Check Status
A: Analog output check,
R: Fixed Range check,
M: Multi-Path check
" " (blank)
C-ARM
C-A
C-R
C-M
C-AR
C-AM
C-RM
" " (blank)
28 Totalizing Status
Operating totalizing function indications.
ITG : Manual totalizing operation mode
ITG@T : Timer totalizing operation mode
@T : Timer-totalizing completed
" " (blank): Manual-totalizing completed
ITG
ITG@T
@T
" " (blank)
29 Gain value of 1
st
path Upper side
(For Firmware V1.20 or later)
00
～
80
30 Gain value of 1
st
path Down side
(For Firmware V1.20 or later)
00
～
80
31 Gain value of 2
nd
path Upper side
(For Firmware V1.20 or later)
00
～
80
32 Gain value of 2
nd
path Down side
(For Firmware V1.20 or later)
00
～
80
33 Gain value of 3
rd
path Upper side
(For Firmware V1.20 or later)
00
～
80
34 Gain value of 3
rd
path Down side
(For Firmware V1.20 or later)
00
～
80
35 Gain value of 4
th
path Upper side
(For Firmware V1.20 or later)
00
～
80
36 Gain value of 4
th
path Down side
(For Firmware V1.20 or later)
00
～
80
37 History of ROFF status
(For Firmware V1.20 or later)
0000
～
9999
38 History of DIS.status
(For Firmware V1.20 or later)
0000
～
9999
Final Field Check-Sum xx+ [CR][LF]
Please refer to Chap.6 for example of detailed
calculations.
[CR][LF] indicates sentence completion.
*xx[CR][LF]