Tieline Bridge-IT, User Manual

Page: 91 / 227

91
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
Configuring a Fuse-IP Remote Client
1. Open the HTML5 Toolbox Web-GUI and click Transport and then Fuse-IP .
2. Click the Fuse-IP Mode drop-down menu and select Client as the Fuse-IP mode if you
are dialing the studio codec. Note: the studio codec should be configured in server mode.
3. Enter the Fuse-IP Server Address , which is the public static IP address of the server
codec at the studio. Then enter the server codec's serial number in the Server Serial
Number text box. Leave the default Fuse-IP Port as 8999 in most situations unless this
port is already in use, e.g. you have multiple codecs behind a firewall using Fuse-IP,
therefore you need to allocate a different port for each Fuse-IP tunnel. Note: the port
number on the client and server codecs must be the same. Configure the
Inactivity
Timeout if you want to turn the Fuse-IP tunnel off after a predetermined time period to
save data, then click Save . Note: Inactivity Timeout can be configured from 0 to 1440
minutes. Enter 0 to disable the timeout.
4. Click the Fuse-IP On/Off button to create a Fuse-IP tunnel between the server and client
codecs. Note: Connected should be displayed after a few seconds if both codecs are
configured correctly and Fuse-IP is enabled on both codecs.