Tieline Bridge-IT, User Manual

Page: 41 / 227

41
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
· Ensure all connection related settings like the port, algorithm, bit rate (etc) match on
both multicast server and client programs or they will not be able to join multicast
streaming sessions.
· The default UDP audio port is 9000 for a multicast client program configured via the
codec front panel.
· You can lock a loaded custom program in a codec to ensure the currently loaded
program cannot be unloaded by a codec dialing in with a different program type.
·
Always dial the multicast server codec connection first before connecting multicast
client codecs.
· Multicast client codecs will display return link quality (LQ) only. The Return reading
represents the audio being downloaded from the network locally.
· It is not possible to connect to a G3 codec and receive multicast IP audio streams.
·
To copy multicast client programs onto multiple codecs see Backup and Restore
Functions .
· To learn more about programs see the section titled "About Program Dialing".
·
See HTML5 Toolbox web-GUI documentation for more detailed information about
"Configuring Multicast Client Programs."
1. Press the HOME button to return to the Home screen, select Connect > IP >
Sessionless and press the button.
2. Select Mcast C (Multicast Client) to configure a client codec program.
3. Use the RETURN button to delete any numbers already entered, then use the numeric
KEYPAD to enter the multicast IP address you want to dial, using the or buttons to
enter the periods in the IP address. The same multicast address and audio port must be used
for both the server and client programs. Next, press the down
navigation button to select
Setup and press .
4. Press the down navigation button to select Algor'm (algorithm) and press .
5. Use the navigation buttons to select an algorithm profile or manually select algorithm settings,
then press .