Tieline Bridge-IT, User Manual

Page: 133 / 227

133
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
8. Click the drop-down arrows on the right-hand side of each active drop-down menu to
adjust the Encoding, Sample rate or Bit rate parameters. Click Next to continue.
9. Click to configure:
· Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for Buffer
priority . It is also possible to configure the Minimum depth and Maximum depth of jitter
over the connection. See Configuring the Jitter Buffer for more details.
· Alternatively, select a Fixed Buffer Level and enter the Jitter Depth , which must be
between 12ms and 5000ms depending on the algorithm you select.
· RFC-compliant FEC can also be configured if required and the percentage is configurable.
10. Click Next to select the check-box if you want to Enable Auto Reconnect .
11. Click Next to name the answering connection for when calls are received by the codec.