Tieline Bridge-IT, User Manual

Page: 165 / 227

165
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
1. Press the SETTINGS button.
2. Use the navigation buttons on the front panel to select Network and press the button.
3. Use the down navigation button to select a VLAN interface.
4. Select Config and then Usage and press the button.
5. Select the mode of operation for this VLAN (e.g. Control & Streaming, Streaming only,
Control Only) and press the button.
6. Use the down navigation button to scroll to Priority .
7. Press the button to enter a number from 0 to 7 inclusive.
8. Press the button to confirm this setting.
VLAN Interface (VLAN configuration only)
This setting applies the VLAN settings to a physical Ethernet port in the codec. Only one physical
Ethernet port is available which cannot be reconfigured.
17.2
Configuring a Hostname
It is possible to assign a hostname to the codec to provide a flexible way of identifying the codec on
a network.
1. Press the SETTINGS button.
2. Use the navigation buttons to select System and press the button.
3. Navigate down to Hostname Enable and press the button to enable this feature.
4. Navigate to
Hostname and press the button to display the Enter Hostname screen
and enter the hostname. Next, navigate to Enter and press the button to save the
settings.
Important Notes:
· Modifying hostname settings requires a codec restart before they take effect
·
In the Hostname only enter the characters a-z, A-Z, 0-9 and - and the first or last
character cannot be a hyphen/dash.