Tieline Bridge-IT, User Manual

Page: 198 / 227

198 Bridge-IT Manual v4.0
© Tieline Research Pty. Ltd. 2019
17.19 Adjusting Time Settings
By default Use NTP time is enabled in the codec. When the codec is attached to a network it will
automatically ping the selected NTP server every two hours and update the time in the codec. It is
also possible to manually synchronize the time. Note: The codec will not ping a server while
connected.
To adjust time settings in the codec:
1. Press the SETTINGS button.
2. Use the navigation buttons to select Time and press the button.
3. Navigate to Use NTP and press the button to enable or disable this feature.
4. Navigate to NTP Synchronize Now and press the button to synchronize the codec time
with the designated NTP Server .
17.20
Installing Software Licences
Bridge-IT XTRA codecs include all software and algorithm feature options when purchased.
Bridge-IT codecs can be upgraded by purchasing and installing licenses with new features.
Options include a multi-unicast license (includes multicast capability), AAC Encode license, or
aptX® Enhanced encoding license. Contact Tieline at
sales@tieline.com , or your favorite dealer,
if you need to purchase a software license upgrade. When a software license has been
purchased there are two ways to perform an upgrade:
1. Automatically download the software license from TieServer and perform the upgrade.
2. Download the new software license file onto your PC and upgrade using the web-GUI.
To install a software license using the HTML5 Toolbox web-GUI see Web-GUI Software License
Installation .
Checking Installed Licenses
The codec License Manager is used to view which licenses are installed in each codec. To view
the licenses installed in your codec:
1. Press the SETTINGS button.
2. Use the navigation buttons to select Licenses and press the button.
3. A list of all possible licenses is displayed and all licenses that have been installed have a
tick next to them.