Tieline Bridge-IT, User Manual

Page: 119 / 227

119
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
Routing Type
Options:
Default No Dial Route or Answer Route is configured. An incoming call will be
routed to an audio stream on a first-come, first-served basis in a multi-
stream program. Note: By default IP streams are routed using audio
ports.
Deterministic Use of Dial and Answer Routes is not usually necessary over IP
because dedicated ports or Line Hunt mode call answering is
employed. However dial routes can be used over IP when a single
stream on an answering codec answers using POTS and/or ISDN
connections, as well as IP. This effectively creates an answering group
using different transports.
Line Hunt Create line hunt groups for multiple incoming callers on a first come,
first served basis. This is ideal for separating groups of inputs and
outputs between different studios or stations. See
Line Hunt Call
Answering for more information.
Important Notes on G3 Profile Settings: The G3 profile setting supports maintaining
specific G3 codec settings when answering a call from a G5 codec.
1. Auto : The codec will dial the G3 codec and connect in mono or stereo.
2. Dual Program : This allows the codec to dial a G3 codec with a Dual Program
profile loaded and support two simultaneous mono connections.
3. Runtime : The G3 codec will retain runtime settings when answering a call from a
G5 codec.
4. Custom : The G3 codec will load a specified profile, e.g. profile 6, which is the first
custom profile number.
Important Notes on G3 Channel Settings :
This setting is for compatibility with the Dual Mono profile in Tieline Commander G3 and i-
Mix G3 codecs. It is designed to configure routing of the audio stream to a specific G3
codec channel consistently.
1. Auto (default): The answering codec will route incoming calls on a first come first
served basis.
2. Channel 1 : The answering codec will always route incoming calls to codec
Channel 1 (left output).
3. Channel 2 : The answering codec will always route incoming calls to codec
Channel 2 (right output).
5. This audio stream connection in the wizard will allow the codec to dial. Enter the name of the
connection in the text box, then click Next .