Tieline Bridge-IT, User Manual

Page: 39 / 227

39
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
3. Use the RETURN button to delete any numbers already entered, then use the numeric
KEYPAD to enter the multicast IP address you want to dial, using the or buttons to
enter the periods in the IP address. Note: The same multicast address and audio port must be
used for both the server and client programs. Next, press the down
navigation button to
select Setup and press .
4. Press the down navigation button to select Algor'm (algorithm) and press .
5. Use the navigation buttons to select an algorithm profile or manually select algorithm settings,
then press .
6. Navigate to and select TTL and enter the IP Time-to-Live value, then press . Please note:
The TTL value you need to use is dependent upon your network infrastructure. Please consult
your network administrator if you are unsure about how to configure this setting.
7. Select Data to enable or disable data in the audio stream. See RS232 Data Configuration for
more information on data connections.
8. Select Proto (protocol) to select the audio protocol and adjust the Remote Audio Port . Select
UDP/IP +RTP for RFC-compliant IP streaming. Press to save settings.