Tieline Bridge-IT, User Manual

Page: 150 / 227

150 Bridge-IT Manual v4.0
© Tieline Research Pty. Ltd. 2019
16.21 Configuring SNMP in the Codec
The codec supports Simple Network Management Protocol (SNMP ) for managing devices on IP
networks.
Description of SNMP Settings in the Codec
Features Operation Button Descriptions
Codec Name A user-specified alphanumeric identifier which may be used by
third-party SNMP software to identify a device. The device name
corresponds
to the ".iso.org.dod.internet.mgmt.mib-
2.system.sysName" SNMP attribute and is completely independent
of DNS, NIS, WINS or other device naming and identification
schemes, though convention is to use the device's fully-qualified
domain name.
Codec Location A user-specified alphanumeric string which may be used by third-
party SNMP software to identify a device. Device location
corresponds
to the ".iso.org.dod.internet.mgmt.mib-
2.system.sysLocation" SNMP attribute.
Contact
A text identifier for the contact person for this managed node,
together with information on how to contact this person.
R/O Community SNMP provides two types of access, namely Read-Only access
and Read-Write access. The R/O Community identifier allows Read
Only level access.
R/W Community
The R/W Community identifier allows Read/Write level access.
Configuring SNMP Settings in the Codec
1. Open the HTML5 Toolbox Web-GUI and click Settings at the top of the screen, then click
Options to display the Options panel .
2. Click the Edit button to configure settings.
3. Click in the text boxes to enter SNMP configuration settings.
4. Click Save to store the new configuration.
MIB Files for SNMP Configuration
Management Information Base (MIB) files are required for SNMP applications to interact with your
Tieline codec and interpret SNMP data. The codec supports SNMPv1 and SNMPv2 MIB protocols.
The required MIB files can be downloaded from the codec using the following link in a PC web
browser connected to the same network as your codec: