62
Bridge-IT Manual v4.0
© Tieline Research Pty. Ltd. 2019
3. Click the
LAN settings
button.
4. If the PC is using a proxy server over the LAN you may need to select the
Bypass
proxy server for local addresses
option box.
5. If you still can't connect, click the
Advanced
button in the
LAN Settings
dialog and
ask your IT administrator to assist you with entering the IP address of the codec into
the
Exceptions
pane of the
Proxy Settings
dialog.
Port Selection
By default port 80 is used by your PC to communicate with the codec and launch the web-
GUI. If port 80 cannot be used across your network for some reason, type the IP address of
your codec into your browser with a full colon and the port number 8080.
E.g.
192.168.0.176:8080
It is also possible to specify a different port for connecting the Toolbox web-GUI to your codec.
1. Press the
SETTINGS
button.
2. Use the navigation buttons to select
WebGUI
and press the
button.
3. Select
Alt. Port
and press
.
4. Use the
KEYPAD
to enter a new port number and press the
button to save the
new setting.
5. Type the IP address of your codec into your browser with a full colon and then the
new port number.
Important Note:
Any new port specified must be within the range 2000 to 65535
inclusive.
Summary of Contents for Bridge-IT
