Thermo Scientific Dionex, Operator'S Manual

Page: 200 / 228

Dionex Integral Systems Operator’s Manual
188
Doc. 065250-06 03/2020
9. Wrap the tubing snugly around the pump head rollers. Lift up the
bottom tubing clip to open it, insert the tubing into the clip opening,
and then release the clip (see
Figure E-7 ).
10. Close the tubing clamp by pushing it to the left until the tabs lock into
place (see Figure E-7 ).
11. Close the pump door, making sure that both tabs are outside the door
(see Figure E-8 ).
12. Connect plumbing lines to the peristaltic tubing fittings as required
for your application. Use the fitting nuts and ferrules provided with
Figure E-7. Peristaltic Tubing Installation Completed
Figure E-8. Peristaltic Pump with Door Closed
Tubing Clamp
(Closed)
Push here
to close the
clamp
Tab