Thermo Scientific Dionex, Operator'S Manual

Page: 170 / 228

Dionex Integral Systems Operator’s Manual
158
Doc. 065250-06 03/2020
Install the 25-Pin D-Sub Connector Inserts
1. Lift the lid on the cap that covers one
of the two TTL and relay openings on
the top of the AE (see
Figure C-6 ).
2. Remove the screws that attach the cap
to the AE and remove the cap.
3. Install either the female (relay) or
male (TTL) 25-pin D-sub connector
insert into the empty TTL and relay
opening, and secure the insert with
screws.
Figure C-7 shows the relay
connector insert installed.
4. Repeat Step 1 through Step 3 for the
other connector insert.
Figure C-6. Top of AE: TTL and Relay
Openings with Caps
Figure C-7. Connector Insert Installed
Cap with
lid open