Thermo Scientific Dionex, Operator'S Manual

Page: 169 / 228

C • TTL and Relay Installation Instructions
Doc. 065250-06 03/2020
157
C.2 Installing the AE TTL and Relay Kit
NOTE Before starting this procedure, install the SP TTL and
Relay Kit (see Section C.1 ).
C.2.1 Overview
The AE TTL and Relay Kit (P/N AAA-068548) provides the parts
necessary for installing TTL and relay connectors onto the top of the AE
and connecting them to the TTL/Relay controller board in the SP. The kit
includes the following parts:
Additional item needed :
Phillips screwdriver
C.2.2 AE TTL and Relay Kit Installation Procedure
These are the main steps in the installation procedure:
•
Installing the 25-pin D-sub connector inserts (female and male) in the
TTL and relay openings on the top of the AE
•
Connecting the cables between the TTL and relay connectors on the
AE and the connectors on the SP TTL/Relay controller board
Part Number Item Quantity
045796 Screw, Phillips, stainless steel 8
068177 Hood, DB25 connector 2
069010 Cable, TTL, female-to-female, 1.8 m
(6 ft) 1
069011 Cable, relay, male-to-male, 1.8 m
(6 ft) 1
069067 Cap nut, with seal 4
069068 Plug, cap nut 2
069071 Insert, 25-pin D-sub connector,
female (for relay) 1
069072 Insert, 25-pin D-sub connector, male
(for TTL) 1