Thermo Scientific Dionex, Operator'S Manual

Page: 108 / 228

Dionex Integral Systems Operator’s Manual
96
Doc. 065250-06 03/2020
Air and liquid lines Check for leaks or spills. Isolate and repair leaks; clean up
spills. Rinse dried chemicals from components with
deionized water.
Check for crimping; replace damaged lines.
All pumps Check for piston seal leaks; replace defective seals.
Conductivity detector Record the total conductivity readings at the beginning of a
run.
Suppressor, EGC Check for leaks. If the suppressor is operating in
AutoSuppression mode, check that bubbles are flowing
from the suppressor regenerant outlet line.
Chromatography Check chromatograms for trending problems (for example,
missed peaks).
Printer Check that there is paper. Check the ink or toner cartridge.
Component or Feature Action