Thermo Scientific Dionex, Operator'S Manual

Page: 33 / 228

3 • SP Sample Preparer Description
Doc. 065250-06 03/2020
21
NOTE The information in this table is not intended to be a
complete representation of National Electrical
Manufacturers Associations (NEMA) standards for
enclosures nor those of the Electrical and Electronic
Manufacturers Association of Canada (EEMAC).
3.3 SP Power and Computer Connections
Receptacles for connecting a power cord and USB (Universal Serial Bus) cable
are on the left side of the SP (see
Figure 3-2 ).
Fuse Holder and Power Receptacle
The fuse cartridge contains two fast-blow IEC 127 fuses rated 3.15 A
(P/N 954745). For instructions on how to change the fuses, see
Section 10.11 .
The power cord plugs into the IEC 320 three-prong receptacle. Connect the power
cord from this receptacle to a grounded power source. If the SP is mounted on an
AE or installed inside an AE, connect the power cord to the power outlet strip
NEMA 4X/IP65
equivalent Intended for use primarily to provide a
degree of protection against corrosion,
windblown dust and rain, splashing
water, and hose-directed water. Mounted on
AE
Figure 3-2. SP USB and Power Receptacles (Vertical Enclosure Shown)
Table 3-1. NEMA Enclosure Types (Continued)
Fuse Holder