Thermo Scientific Dionex, Operator'S Manual

Page: 164 / 228

Dionex Integral Systems Operator’s Manual
152
Doc. 065250-06 03/2020
C.1 Installing the SP TTL and Relay Kit
C.1.1 Overview
The SP TTL and Relay Kit (P/N 068573) provides the parts necessary for
adding TTL and relay control functions to the SP. The kit includes the
following parts:
Additional item needed :
Phillips screwdriver
C.1.2 SP TTL and Relay Kit Installation Procedure
These are the main steps in the installation procedure:
•
Attaching the TTL/Relay controller board to the main SP electronics
board
•
For a stand-alone SP only: Installing the TTL/Relay panel on the SP
and connecting the cables
Attach the TTL/Relay Controller Board to the Main SP Electronics
Board
1. Turn off the SP power.
2. Disconnect the power cord.
Part Number Item Quantity
045796 Screw, Phillips, stainless steel 8
60-067039 Panel, TTL/Relay 1
067141 Controller board, TTL/Relay 1
60-067746 Cable, TTL, female-to-female,
46 cm (18 in) 1
60-067835 Cable, relay, male-to-male, 46 cm
(18 in) 1
068174 Connector, female-to-female, DB25 1
068176 Connector, male-to-male, DB25 1
069586 Standoff, 6 mm hex 3