TEXIO DL-2060, Instruction Manual

Page: 5 / 152

II
USING THE PRODUCT SAFELY
WARNING and CAUTION
■
Do not remove the product's covers and panels
Never remove the product's covers and panels for any purpose.
Otherwise, the user's electric shock or a fire may be incurred.
■
Warning on using the product
The warning items given below are to avoid danger to the user's body and life and avoid the damage and deterioration
of the product. Use the product, observing the following warning and caution items.
■
Warning items on power supply
●
Power supply voltage
This equipment operates from a power source that does not apply more than 250V rms between the supply
conductors or between either supply conductor and ground. A protective ground connection by way of the
grounding conductor in the power cord is essential for safe operation.
●
Power cord
Important: The attached power cord set can be used for this device only.
If the attached power cord is damaged, stop using it and call the company or each sales office.
If the power cord is used without the damage being removed, an electric shock or fire may be caused.
●
Protection fuse
If an input protection fuse is blown, the product does not operate. When the fuse is blown, the user can replace it.
However, replace it correctly, observing the warning and caution items that are provided in the section of the
manual where the fuse replacement is explained. If the fuse is incorrectly replaced, a fire may occur.
●
Changing the power supply voltage
The product enables to change operational power supply voltage by switch over the inlet at rear panel. Please
refer to the section
“1.1.2.2 To change fuse”.
■
Warning item on grounding
The product has the GND terminal on the panel surface to protect the user from electric shock and protect the product.
Be sure to ground the product to safely use it.
■
Warning item on installation environment
●
Operating temperature
Use the product within the operating temperature indicated in the rating column. If the product is used with the
vents of the product blocked or in high ambient temperatures, a fire may occur.
●
Operating humidity
Use the product within the operating humidity indicated in the rating column. Watch out for condensation by a
sharp humidity change such as transfer to a room with a different humidity. Also, do not operate the product with
wet hands. Otherwise, an electric shock or fire may occur.
●
Use in a gas
Use in and around a place where an inflammable or explosive gas or steam is generated or stored may result in an
explosion and fire. Do not operate the product in such an environment.
Also, use in and around a place where a corrosive gas is generated or spreading causes a serious damage to the
product. Do not use the product in such an environment.
●
Do not let foreign matter in
Do not insert metal and flammable materials into the product from its vent and spill water on it. Otherwise, an
electric shock and fire may occur.